Evector SportStar RTC - Exceeding of Load Factors; Flight in Severe Turbulence

MAINTENANCE MANUAL
ERTC022-10-AS
Effectivity: All
05-50
Page 05-35
2017-12-22
Issue 2 | Rev. 0
3. EXCEEDING OF LOAD FACTORS / FLIGHT IN SEVERE TURBULENCE
Exceeding the maximum flight load factors can occur when improperly performed flight maneuvers or
from gust at flight through turbulence.
Load factor summary
Max. maneuvering load factors:
n
max
= + 4
n
min
= - 2
Max. load factors for flight in severe turbulence:
n
max
= + 4
n
min
= - 2
After every exceeding of load factors / flight in severe turbulence inspect the airplane in the following
range:
EXCEEDING OF LOAD FACTORS / FLIGHT IN SEVERE TURBULENCE
INSPECTION
Page: 1 of 3
Ref. Prescribed works Made by Checked by
1. GENERAL – PREPARATORY WORKS
06-40 Remove an open all required covers and hatches.
07-10 Jack the airplane.
08-30 Do the airplane leveling; contact airplane
manufacturer if any permanent deformation were
found.
2. POWER PLANT AND ENGINE COPMARTMENT
71-10 Check quick closing locks and cowlings for condition
and attachment.
71-10 Check attachment engine mount-firewall for
condition.
71-10 Check rubber silentblocks for condition.
Check battery, wires / harness and other electric
plants for condition, integrity, connections and
attachment.
Ch. 28 Check hoses / tubes and other fuel system plants for
condition, integrity, attachment and security.
76-10 Check engine control for condition.
79-20
75-00
Check water and oil cooler for condition and leaks.
Notes:
Date: ........................................ Signature: ........................................