Evector SportStar RTC - Page 47

MAINTENANCE MANUAL
ERTC022-10-AS
Effectivity: All
05-20
Page 05-15
2017-12-22
Issue 2 | Rev. 0
SCHEDULED INSPECTION AFTER 100 FH OR ANNUAL INSPECTION
Page: 5 of 12
Ref. Prescribed works Made by Checked by
Wheel
(continued)
32-41 Check valve for condition around the hole in the rim.
Beware of cutting the valve when the tire slippage.
32-41 Check bearings for condition, free rotation and play.
Steering control system
32-50 Check control rods for condition, rod ends for
security.
32-50 Check nose wheel control lever covers for condition,
wear; repair damage.
4. MAIN LANDING GEAR
07-10 Jack the airplane.
Main landing gear legs
32-10 Check fiberglass legs for condition, cracks; repaint
damaged areas. Contact airplane manufacturer if
cracks were found.
32-10 Check leg attachment into the fuselage (no play) –
move the leg forward / backward, upward / downward;
at the same time check wheel play on the axle; tighten
attachment bolts if the leg has a play.
32-10 Check joints for tightening and security.
32-10 Check cloth cover which covers the leg – fuselage
input hole.
- Check grounding for condition.
Wheel fairings
32-10 Check wheel fairings for condition, cracks,
deformation and damage; repair as required.
Tires
32-41 Check tire for condition, damage, uneven or
excessive wear and slippage; replace as required.
12-10 Check pressure; inflate to required pressure as
required.
Notes:
Date: ........................................ Signature: ........................................