Evector SportStar RTC - Page 59

MAINTENANCE MANUAL
ERTC022-10-AS
Effectivity: All
05-50
Page 05-37
2019-03-22
Issue 2 | Rev. 1
EXCEEDING OF LOAD FACTORS / FLIGHT IN SEVERE TURBULENCE
INSPECTION
Page: 3 of 3
Ref. Prescribed works Made by Checked by
6. WING
57-10
57-30
Check wing structure / skin for condition, especially in
the area of attachments.
57-10 Check integral tank riveted joints for leakage.
57-40 Check wing attachments for condition.
57-40 Check play of wing attachments – move the wing tip
upward/downward, frontward/rearward.
57-51
57-52
Check ailerons and wing flaps structure / skin for
condition.
57-51
57-52
Check ailerons and wing flaps hinges for condition
and free movement.
Ch. 27 Check control, brackets and bellcranks for condition.
27-50 Check wing flaps control for condition.
27-50 Check wing flaps for play.
7. FINISHING WORKS
Check the completeness of tools and instruments
used during the inspection.
06-40 Install and close all covers and hatches.
Lower the airplane.
Fill out the record about an exceeding of load factors
/ flight in severe turbulence inspection in the logbook.
Contact airplane manufacturer if permanent
deformation, cracks or exceeded allowable value of
play were found.
Notes:
Date: ........................................ Signature: ........................................