Fargo DTC300 - Resolving the Incorrect Image Darkness Problems

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC300/DTC300M Card Printer/Encoder User Guide (Rev. 2.2)
4-43
Resolving the Incorrect Image Darkness problems
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
 Symptom: Printed cards are too dark or too light.
 Printer Error State: None
 LCD Error Display: None
 Driver Monitor Error Display: None
2 Run a self-test to ensure that the issue is not with the Driver settings.
3
Adjust the Dye-Sub Intensity setting within the Image Color tab of the Printer
Driver. See Using the Image Color tab (DTC300/DTC300M) procedure.