Fargo DTC300 - Resolving a Ribbon Break Jam Error

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC300/DTC300M Card Printer/Encoder User Guide (Rev. 2.2)
4-21
Resolving a Ribbon Break Jam Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
 Symptom: The Print Ribbon has become jammed or has broken in the
Printer
 Printer Error State: The Ribbon Supply Encoder Sensor has
unexpectedly stop receiving information from the Ribbon Encoder
 LCD Error Display: Ribbon BreakJam
 Driver Monitor Error Display: Ribbon BreakJam