Fargo DTC300 - Section 9: Menu Option Tree; Accessing the Menu Option Structure Tree; Selecting from the Menu Option Structure Tree (Displayed, Below)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC300/DTC300M Card Printer/Encoder User Guide (Rev. 2.2)
9-1
Section 9: Menu Option Tree
Accessing the Menu Option Structure Tree
When the Printer is powered on and sitting idle, a MENU option appears above the center
softkey button. Use this menu option to access the functions, as shown below. Refer to the
Menu Option Structure Tree for all available menu options.
Selecting from the Menu Option Structure Tree (displayed, below)
Name of printer
INFO
Firmware Version
Card Count
Magnetic: No/Yes
E Card : No/ Yes
Flipper : No/ Yes
SecureMark : No/ Yes
Password: No/ Yes
IP Address