Fargo DTC300 - Resolving the Mag Verify Error

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC300/DTC300M Card Printer/Encoder User Guide (Rev. 2.2)
4-14
Resolving the Mag Verify Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
 Symptom: The Printer is unable to verify encoded data.
 Printer Error State: The Printer is unable to verify encoded data.
 LCD Error Display: Mag Verify
 Driver Monitor Error Display: Mag Verify