Fargo DTC300 - Resolving a Ribbon RFID Error (Ribbon RFID Antenna Is Corrupted) (Cont.)

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC300/DTC300M Card Printer/Encoder User Guide (Rev. 2.2)
4-12
Resolving a Ribbon RFID Error (Ribbon RFID Antenna is Corrupted) (cont.)
Step Procedure
2 Replace the Print Ribbon
a. Replace the Print Ribbon Cartridge.
b. Press on the Resume button.
c. If the error continues, see Resolving the Ribbon RFID Error (Ribbon RFID
Sensor is Corrupted) in this section.