Fargo DTC300 - Resolving a Card Jam Error

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC300/DTC300M Card Printer/Encoder User Guide (Rev. 2.2)
4-30
Resolving a Card Jam Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
 Symptom: Card is jammed.
 Printer Error State: Card TOF Sensor is detecting no card motion
 LCD Error Display: Card Jam
 Driver Monitor Error Display: Card Jam