Fargo DTC300 - Using the Overlay; Print Area Dropdown Menu

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC300/DTC300M Card Printer/Encoder User Guide (Rev. 2.2)
5-59
Using the Overlay / Print Area dropdown menu
Step Procedure
1
Select the Full Card option for the Printer to overlay and/or print the entire card.
OR
Select the Defined Area(s) option for the Printer to overlay and/or print only in
the selected and defined area or areas.
OR
Select the Undefined Area(s) option for the Printer to overlay and/or print only in
the space outside the selected and defined area.
OR
Select the Omit Smart Chip Area option for the Printer to overlay and/or print
only in the space outside the standard location of a smart chip.
OR
Select the Omit Magnetic Stripe Area option for the Printer to overlay and/or
print only in the space outside the standard location of an ISO Magnetic Stripe.
OR
Select the Omit Signature Area option for the Printer to overlay and/or print only
in the space outside the standard location of a signature panel.
(Note: In the card grid, black indicates the area in which the overlay and/or
printing will be applied.)
Continued on the next page