Fargo DTC300 - Using the ASCII Offset Radio Buttons

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC300/DTC300M Card Printer/Encoder User Guide (Rev. 2.2)
5-51
Using the ASCII Offset radio buttons
Use this option to customize the Character ASCII Offset used to encode the magnetic data
on the currently selected track. (Note: This character offset value is subtracted from the
ASCII value of each Magnetic Stripe data character prior to encoding on the track.)
Step Procedure
1 Select NULL to change the ASCII Offset to NULL.
OR
Select SPACE to change the ASCII Offset to SPACE.
OR
Select ZERO to change the ASCII Offset to ZERO.