Fargo DTC300 - Holomarktm and Custom Holomarktm - Application Specifications

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC300/DTC300M Card Printer/Encoder User Guide (Rev. 2.2)
2-6
HoloMarkTM and Custom HoloMarkTM - Application Specifications
HoloMarkTM and Custom HoloMarkTM foils will cover a dimensional area of 1.5 cm x 1.5
cm. The exclusive areas are as follows:
 HoloMarkTM and Custom HoloMarkTM card end-users will be able to choose 1 of 8 pre-
defined placements (corners) via Printer Driver (4 positions) Landscape and (4 positions)
Portrait mode.
 HoloMarkTM foil placement will not interfere with card punch slots.
 Foil Color options will be silver or gold.
 Outside edge placement of Foil impression options on card will be 0.4 cm from edge of
card.
 HoloMarkTM foil placement options will be at all four corners of card located 0.4 cm from
edge of card.