Fargo DTC400 - Section 5: Ethernet Option __________________________________________________

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.2)
5-1
Section 5: Ethernet Option
Table of Contents
Section 5: Ethernet Option __________________________________________________5-1
Table of Contents ___________________________________________________________________ 5-1
Introduction__________________________________________________________________5-3
Technical Specification - Ethernet Option ________________________________________________ 5-3
Functional Specification - Ethernet Option________________________________________________ 5-4
Network Services - Overview __________________________________________________________ 5-5
Reviewing the Print Server__________________________________________________________ 5-5
Reviewing the Web Page Server _____________________________________________________ 5-5
Reviewing the Network Management Interface __________________________________________ 5-5
Reviewing the Telnet Server ________________________________________________________ 5-5
Network Management Interface ________________________________________________________ 5-6
Telnet Command Line Interface ________________________________________________________ 5-6
Initiating a Telnet Session __________________________________________________________ 5-6
Reviewing the Telnet Command Table ________________________________________________ 5-7
Reviewing the Telnet Command Table (continued) ____________________________________ 5-8
Reviewing the Telnet Command Table (continued) ____________________________________ 5-9
Reviewing the Telnet Command Table (continued) ___________________________________ 5-10
Reviewing the Telnet Command Table (continued) ___________________________________ 5-11
Reviewing the Telnet Command Table (continued) ___________________________________ 5-12
Reviewing the Telnet Command Table (continued) ___________________________________ 5-13
Ethernet Web Pages – Standard Procedures ______________________________________5-13
Reviewing Web page security ______________________________________________________ 5-13
Logging In _____________________________________________________________________ 5-14
Accessing the Home pages_________________________________________________________ 5-15
Reviewing the Ethernet Home Pages ___________________________________________________ 5-16
Reviewing the DTC400 Home Page__________________________________________________ 5-16
Reviewing the Home Page Categories and Fields (table)__________________________________ 5-17
Configuring the Network Settings______________________________________________________ 5-18
Accessing the Network Settings page_________________________________________________ 5-18
Reviewing the Interface ___________________________________________________________ 5-19
Reviewing the Current Settings _____________________________________________________ 5-19
Switching to the automatic IP address mode ___________________________________________ 5-20
Changing to the static IP address mode _______________________________________________ 5-21
Changing to the static IP address mode (continued) ___________________________________ 5-22
Entering the TCP Window Size _____________________________________________________ 5-23
Using the Clear Changes button _____________________________________________________ 5-24
Using the Ribbon Information page ____________________________________________________ 5-25
Using the TCP/IP page ______________________________________________________________ 5-26
Using the TCP/IP Status Web Page __________________________________________________ 5-27
Using the Printer page_______________________________________________________________ 5-28
Reviewing the Printer page (continued)_____________________________________________ 5-29
Using the System Log page___________________________________________________________ 5-30
Changing the Log Name___________________________________________________________ 5-31
Changing the Log Name (continued)_______________________________________________ 5-32
Selecting the Log Type____________________________________________________________ 5-33
Selecting the Log Destination_______________________________________________________ 5-34
Setting up Email Event logging _____________________________________________________ 5-35
Specifying UDP Event logging _____________________________________________________ 5-36
Specifying TCP Event logging ______________________________________________________ 5-37