RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.2)
4-28
Resolving a Wrong Ribbon Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
ď‚· Symptom: Printer errors out as soon as it receives data from the PC
ď‚· Printer Error State: The Ribbon installed does not match the Printer Driver
information
ď‚· LCD Error Display: Wrong Ribbon
ď‚· Driver Monitor Error Display: Wrong Ribbon