RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.2)
3-30
Printing a Test Print Image
Step Procedure
1 a. From your computer’s startup menu, select Settings > Printers and Faxes
(Windows XP) or > Printers (Windows 98SE, Me and 2000).
b. Double click on the DTC400 Card Printer under the Printers window.
c. Select Printing Preferences under the Printer drop-down menu. This will
bring up the DTC400 Printing Preferences window.
2
a. Select the Card tab, then click on the Test Print button, as shown on the
next page. (Note: Ensure that the Ribbon is installed before proceeding.
The correct Ribbon type is selected in the Device Options tab.)
b. When the Test Print button is selected, an image is copied to the Printer.
3 This completes the DTC400 Card Printer/Encoder installation procedure.
For additional help regarding the Test Print and other related items please see
the DTC400 Card Printer User Guide located under Start > Programs > Fargo.
To Next Page
Loading...
