Fargo DTC400 - Resolving the Incomplete Resin Printing Problems

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.2)
4-49
Resolving the Incomplete Resin Printing problems
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
 Symptom: Black resin text and barcodes appear faded or too light.
 Printer Error State: None
 LCD Error Display: None
 Driver Monitor Error Display: None
2
Increase the Resin Heat setting within the Image Color tab of the Printer
Driver. See the Using the Image Color tab (DTC400).
3
Increase the Image Darkness. See the Using the Image Darkness Option
procedure.