RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.2)
5-34
Selecting the Log Destination
Specify one destination for the log.
Step Procedure (No event logging)
1
Select the System Log link.
2 Select the link for the log name you want to view or configure (the default
choices are log1 or log2).
3
Select the None radio button when no log is required. (Note: This is the
default.)
4
Select Submit.
5
Login as a root User if you are so prompted. (Note: Any change of setting
will only be accepted after you have successfully logged in.)
To Next Page
Loading...
