Fargo DTC400 - Using the Image Color Tab

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.2)
6-27
Using the Image Color tab
Step Procedure
1
Select the Algebraic color matching option and then use this option to control
the Contrast and Gamma of the printed image, as well as the individual color
balance of Yellow, Magenta and Cyan. (Note: In most cases, the default
settings of these options will suffice.)
2 Control the overall darkness and lightness of the printed image by adjusting the
Dye-Sub Intensity slide by clicking and dragging the slide.
 Move the slide to the left to cause less heat to be used in the printing
process, thus generating a lighter print.
OR
 Move the slide to the right to cause more heat to be used, thus generating a
darker print. (Note: This slide only affects those images printed with dye-
sublimation Ribbon panels (YMC).)