Fargo DTC400 - Using the Reboot Pages; Rebooting the Ethernet Server

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.2)
5-45
Using the Reboot pages
Rebooting the DTC400 and HDP600 restarts only the Ethernet Print Server.
Rebooting the Ethernet Server
The Reboot page allows the User to restart the Ethernet Print Server.
Step Procedure
1
Select the Administration link.
2 Log in as a root User (using the old password) if you are so prompted.
(Note: Any change of setting will only be accepted after you have
successfully logged in.)
3
Select the Reboot link.
4
Select the Reboot button.