Fargo DTC400 - Using the Print Back Side Only Option

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.2)
6-24
Using the Print Back Side Only option
Use this option to print only onto the backside of cards.
Step Procedure
1
Select this option to print only onto the backside of cards. (Note: Load the
cards in the usual fashion.)
 When this option is selected, the Print Both Sides option is
automatically disabled.
 When attempting to print a two-page document (if Print Back Side Only
is selected), the first page of the document will print on the backside of
the card.
 The second page of the document will then be printed on the back of a
second card.