Fargo DTC400 - Using the Ribbon Tension Option; Using the Lcd Contrast Option

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.2)
6-101
Using the Ribbon Tension Option
Step Procedure
1 Use the Ribbon Tension option to increase the amount of tension (drag) on the
ribbon during printing.
Enter a negative value to decrease the amount of tension that is placed on the
ribbon during printing
OR
Enter a positive value to increases the amount of tension that is placed on the
ribbon during printing.
Using the LCD Contrast Option
Use this option to adjust the contrast of the LCD.
Step Procedure
1 Enter a positive value to increase the contrast of the LCD display on the front of
the Printer.
OR
Enter a negative value to decrease the contrast of the LCD display on the front
of the Printer.