Fargo DTC400 - Resolving a Invalid Ribbon Error

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.2)
4-26
Resolving a Invalid Ribbon Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
 Symptom: Printer errors out as soon as it receives data from the PC
 Printer Error State: The Ribbon installed does not match the Printer model.
 LCD Error Display: Invalid Ribbon
 Driver Monitor Error Display: Invalid Ribbon