RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.2)
5-43
Upgrading the Print Server
This procedure provides a means to upgrade the Firmware in the Printer Server not the main
Printer.
Step Procedure
1
Select the Administration link.
2
Log in as a root User (using the old password) if you are so prompted. (Note:
Any change of setting will only be accepted after you have successfully logged
in.)
3
Select the Upgrade link.
4
Select the Browse button.
5 Navigate to and select the appropriate file to upload.
To Next Page
Loading...
Need help?
General
