Fargo DTC400 User Manual

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.2)
2-4
Technical Specifications (continued)
Type Description
Resolution 300 dpi (11.8 dots/mm)
Supply
Voltage
100-240 VAC, .6-1.3 A
Supply
Frequency
50 Hz/60 Hz
System
Requirements
IBM-PC or compatible; Windows 98SE, Me, 2000 and XP; Pentium™
class 233 MHz computer with 64 MB of RAM or higher, 200 MB free
hard disk space or higher, USB 1.1
Weight
Single-sided Printer: 15 lbs. / 7 kg
Visual Security Solutions (Specifications)
VeriMarkTM Cards - 2-D holographic foil application
VeriMarkTM Cards are a low cost, customized 2-D holographic foil application, that is made
in two steps.
 The first step is to emboss a base foil 1.9 cm (L) x 1.3 cm (H) onto the surface of a blank
white card.
 The second step is debossing a custom-made dye into the surface of the base foil -
leaving a customized image, logo or text provided by the customer.
 Two separate color foils are used to contrast the impression.
End Users will be able to choose between 8 different card placements (4 - landscape) and
(4-portrait) where the VeriMarkTM can be located. When its time to print through the Driver,
the End User will select the location on their organizations card design around which no
printing and overlay will be placed.
Custom HoloMarkTM Cards
A Custom HoloMark TM Card is a three-dimensional holographic image transferred to metal
foil and embossed to blank cards. The image is customer specific and the program mirrors
our holographic laminates program with a couple exceptions.

Fargo DTC400 Specifications

General

Brand	Fargo
Model	DTC400
Category	Printer
Language	English