Fargo DTC400 User Manual

RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.2)
2-3
Technical Specifications (continued)
Type Description
Humidity 20-80% non-condensing
Interface USB 1.1
Memory 2MB RAM
Operating
Temperature
65° to 80° F / 18° to 27° C
Print Area CR-80 edge-to-edge
Printer
Drivers
Windows 98SE, Me/2000/XP
Print Method Dye-Sublimation/Resin Thermal Transfer
Print Speed
 7 seconds per card / 514 cards per hour (K)*
 12 seconds per card / 300 cards per hour (KO)*
 27 seconds per card / 133 cards per hour (YMCKO)*
 35 seconds per card / 102 cards per hour (YMCKOK)*
 35 seconds per card / 102 cards per hour (YMCFKO)*
* Indicates the ribbon type and the number of ribbon panels printed
where Y=Yellow, M=Magenta, C=Cyan, K=Resin Black, O=Overlay,
F=Flourescent
**Print speed indicates an approximate batch print speed and is
measured from the time a card feeds into the printer to the time it ejects
from the printer.
Print speeds do not include encoding time or the time needed for the
PC to process the image. Process time is dependent on the size of the
file, the CPU, amount of RAM and the amount of available resources at
the time of the print.

Fargo DTC400 Specifications

General

Brand	Fargo
Model	DTC400
Category	Printer
Language	English