RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400 Card Printer/Encoder User Guide (Rev. 2.2)
4-11
Resolving a Ribbon RFID Error (Ribbon RFID Antenna is Corrupted)
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
Symptom: Printer RFID Sensor does not detect a recognizable signal from
the Ribbon.
Printer Error State: The Ribbon tag information is corrupted or incorrect.
LCD Error Display: Ribbon RFID Error
Driver Monitor Error Display: Ribbon RFID Error
To Next Page
Loading...
