FARO
®
Laser Scanner Manual
104
Chapter 7: Controller Software
7.4.6 On-Site Registration
Figure 7-42: On-Site Registration Settings
This page displays the available settings to upload, process, and register
scans on a connected SCENE instance.
All uploaded scans will be continuously processed and registered according to
the following settings.
Refer to the
Processing and Registration chapters in SCENE manual for
details about the processing and registration related settings.
Processing The Processing section contains settings that define important processing
options that can be run remotely on SCENE after the scans have been
uploaded.
Find Spheres
Slide to turn this option ON to automatically detect spheres in the uploaded
scans. Select this setting when you use spheres as external targets for a
target based registration.
To Next Page
Loading...
