FARO
®
Laser Scanner Manual
28
Chapter 6: Getting Started
Chapter 6: Getting Started
This chapter will provide preliminary steps and basic FARO Laser Scanner
operations and will guide you step-by-step from setting up the FARO Laser
Scanner to recording your first scan.
6.1 Charging the Battery
The Power Block battery can be charged in the FARO Laser Scanner or in the
FARO Power Dock battery charger. Carefully read the safety measures
described in
Power Block Battery Safety Measures and Power Dock Battery
Charger Safety Measures
before using them.
It is recommended to fully charge the battery before use. Retain a spare
battery, if required, during your scan project.
The power supply unit can be used in many countries. It is compatible with a
100 V AC to 240 V AC 50/60 Hz power source. Use a plug adapter when
necessary.
DANGER
Danger of explosion or fire
Do not immerse batteries into water or fire.
Do not bring metal objects into contact with the battery
terminals. The terminals may short circuit and generate heat
in this condition.
DANGER
Danger of fire or electric shocks
Ensure that the devices are protected from rain or spraying
water.
The power supply unit and the Power Dock battery charger
are not for outdoor use.
To Next Page
Loading...
