Farr KT5500 - Failure Or Difficulty Of Tong To Shift

KT5500 5-
1
/
2
” Tong & CLInCHER® BaCKup
SECTIon ConTEnTS
4.5
TECHnICaL ManuaL
TRouBLESHooTIng
D. FAILURE OR DIFFICULTY OF TONG TO SHIFT
1. POSSIBLEPROBLEM:Bentorbrokenshifterhandle.
 SOLUTION:Replaceshifterhandle.
2. POSSIBLEPROBLEM:Bentorbrokenshifteryoke.
 SOLUTION:Inspectandreplaceshifteryoke.
3. POSSIBLEPROBLEM:“Frozen”orhard-to-moveshifterhandle.
 SOLUTION:Greaseshiftershaft.
4. POSSIBLEPROBLEM:Bentorbrokenshiftershaft.
 SOLUTION:Replace.
5. POSSIBLEPROBLEM:Lockingnutsonshiftingshafthaveloosenedandpositionofyokehaschanged.
 SOLUTION:Repositionyokeandre-tightenlockingnuts.
6. POSSIBLEPROBLEM:Shiftingyokehascomeloosefromshiftingshaft
 SOLUTION:Inspectyokeandinspectfordamage.Iffreeofdamage,replaceonshaftandtightenlockingnuts.
7. POSSIBLEPROBLEM:Tongpopsoutofgear
 SOLUTION:Ensurethatdetentball&springassemblyhasbeencorrectlyset.