Festo CPX-CMAX-C1-1 Mounting, Installation And Diagnostics

Contents and general safety instructions
XIV
Festo P.BE−CPX−CMA X−SYS−EN en 0908NH
Notes on this description
This description refers to the following versions:
 CPX−CMAX−C1−1 axis controller starting from software
version V1.0
This description contains special information on the mode of
operation, mounting, installation and commissioning of the
CMAX axis controller with the modules and components on
the axis string (see Tab.0/2).
Information about the activation, programming and diagnosis
of a CMAX
with the used CPX node can be found in the
CMAX communication profile" description.
Special information about the configuration for certain CPX
nodes can be found in the corresponding supplementary
description. See Tab.0/3.
General basic information on the mode of operation, mount
ing, installing and commissioning CPX terminals can be found
in the
CPX system description, type P.BE−CPX−SYS−... .

Festo CPX-CMAX-C1-1 Specifications

General

Brand	Festo
Model	CPX-CMAX-C1-1
Category	Controller
Language	English