EasyManua.ls Logo

Fibocom L860-GL - Page 42

Fibocom L860-GL
254 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Reproduction forbidden without Fibocom Wireless Inc. written authorization All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 42 of 254
Command Description
0x68 0x82 Check Error - secure messaging not supported
0x69 0xXX Check Error - command not allowed
0x69 0x00 Check Error - no information provided
0x69 0x81 Check Error - command incompatible with file structure
0x69 0x82 Check Error - security status not satisfied
0x69 0x83 Check Error - authentication method blocked
0x69 0x84 Check Error - referenced data invalidated
0x69 0x85 Check Error - conditions of use not satisfied
0x69 0x86 Check Error - command not allowed (no current EF)
0x69 0x87 Check Error - expected SM data objects missing
0x69 0x88 Check Error - SM data objects incorrect
0x6A 0xXX Check Error - wrong parameters
0x6A 0x00 Check Error - no information provided
0x6A 0x80 Check Error - incorrect parameters in data field
0x6A 0x81 Check Error - function not supported
0x6A 0x82 Check Error - file not found
0x6A 0x83 Check Error - record not found
0x6A 0x84 Check Error - not enough memory space in the file
0x6A 0x85 Check Error - Lc inconsistant with TLV structure
0x6A 0x86 Check Error - inconsistant parameters P1-P2
0x6A 0x87 Check Error - Lc inconsistant with P1-P2
0x6A 0x88 Check Error - referenced data not found
0x6B 0xXX incorrect parameter P1 or P2
0x6C 0xXX Check Error - wrong length - xx is the correct length
0x6D 0xXX unknown instruction code given in the command
0x6E 0xXX wrong instruction class given in the command
0x6F 0xXX technical problem with no diagnostic given
<response> Response of a successful completion of the command previously issued
(hexadecimal character uppercase format). STATUS and GET RESPONSE return data,
which gives information about the current elementary data file_id. This information
includes the type of file and its size (refer to GSM 11.11). After READ BINARY or READ
RECORD command the requested data will be returned. <response> is not returned
after a successful UPDATE BINARY or UPDATE RECORD command.

Table of Contents