Fibocom L860-GL - 4.2.1 +CFUN, Set Phone Functionality

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 45 of 254
Command Description
[Syntax]
AT+CSIM=?
[Response/Action]
OK
Parameters <length>:
integer type; length of the characters that are sent to TE in <command> or <response>
<command>:
command passed on by MT to SIM in hex format
<response>:
response to the command passed on by the SIM to the MT
Example
Reference 3GPP TS 27.007
4.2 Other Parameter Commands
4.2.1 +CFUN, Set Phone Functionality
This command set the phone functionality.
Command Description
Set [Function]
The Set command selects the level of functionality <fun> in the modem.
[Syntax]
AT+CFUN=<fun>[,<rst>]
[Response/Action]
OK
or
+CME ERROR: <err>
Read [Function]
The Read command displays the current level of functionality.