Fibocom L860-GL - CTZR, Time Zone Reporting

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 67 of 254
Command
Description
AT+CTZU=0
OK
AT+CTZU?
+CTZU: 0
OK
Reference 3GPP TS 27.007
5.1.3 +CTZR, Time Zone Reporting
This command enables/disables the time zone change event and Daylight saving time reporting.
Command Description
Set [Function]
This set command controls the time zone change event reporting. If reporting is
enabled the MT returns the unsolicited result code +CTZV: <tz>,
+CTZE: <tz>,<dst>,[<time>], or +CTZEU: <tz>,<dst>,[<utime>]
whenever the time zone is changed. The MT also provides the time zone upon network
registration if provided by the network.
[Syntax]
AT+ CTZR = <reporting>
[Response/Action]
OK
or:
+CME ERROR: <err>
Read [Function]
Read command returns the status of the time zone change event reporting
(enable/disable) (on/off).
[Syntax]
AT+ CTZR?
[Response/Action]
+CTZR: < reporting >