Fibocom L860-GL - CBM, Unsolicited Response (New CB Message Receipt)

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 91 of 254
Command
Description
AT+CNMA
OK
AT+CMGS=18 // send to myself
> 079179521201009511000c917952446505430004AA0441424344
+CMGS: 70
OK
+CMT: ,23
0791795212010095040C917952446505430004502032115430800441424344
6.1.11 +CBM, Unsolicited Response (New CB Message Receipt)
The +CBM unsolicited response is sent to the TE upon receipt of a new cell broadcast message if +CNMI
parameter <bm> is set to 2. Refer to “+CNMI, New Message Indications to Terminal”.
This unsolicited message displays the received CB message. The displayed CBM is not saved in
message storage.
Unsolicited Response
In text mode: (+CMGF=1):
+CBM: <sn>,<mid>,<dcs>,<page>,<page><CR><LF><data>
In PDU mode: (+CMGF=0):
+CBM: <length><CR><LF><pdu>
Command
Description
Set N/A
Read
N/A
Test N/A
Parameters <sn> Message serial number.
<mid> Message ID.
<page> Current page number.
<pages> Total number of pages.
<data> Message contents in text mode.
<length> Size of message in PDU mode format, in octets.
<pdu> Message header and contents in PDU mode format. See description in
“+CMGR,, Read Message”.
Example