Fibocom L860-GL - 6.1.15 +CMGR, Read Message

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 97 of 254
Command
Description
message text
OK
AT+CSDH=1
OK
AT+CMGL="STO SENT"
+CMGL: 142,"STO SENT","054565034",,,81,<message length>
message text
OK
AT+CMGS=18 //send to myself
> 079179521201009511000c917952446505430004AA0441424344
+CMGS: 68
OK
AT+CPMS="sm" // change to SIM to read the incoming messages
+CPMS: 2,20,11,61,2,20
OK
Reference 3GPP TS 27.005
6.1.15 +CMGR, Read Message
These commands handle the reading of SMS. The command displays the message in location <index> of
the preferred message storage <mem1> (selected using the +CPMS command). If the status of the
message is "RECEIVED UNREAD", the +CMGR command changes the status to "RECEIVED READ".
Command Description
Set [Function]
The Set command reads the SMS located at <index> in the Modem message storage
and displays it
[Syntax]
AT+CMGR=<index>
[Response/Action]
If text mode (+CMGF=1) command execution is successful and SMS-DELIVER:
+CMGR:
<stat>,<oa>[,<alpha>],<scts>[,<tooa>,<fo>,<pid>,<dcs>,<sca>,<tosca>,<lengt
h>]<CR><LF><data>