Fibocom L860-GL - 11.2.13 +CGEQNEG，G Quality of Service Profile (Negotiated)

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 217 of 254
Command
Description
Other values are reserved.
<Signaling Indication> Supported in R7 P S a numeric parameter used to indicate
confirmat content of submitted SDUs for a PDP context. This parameter should be
provided if the Traffic class is specified as interactive (refer 3GPP TS 24.008
subclause 10.5.6.5).
0 PDP context is not optimized for confirmat (default value)
1 PDP context is optimized for confirmat<PDP_type>: (see +CGDCONT and
+CGDSCONT commands
Example AT+CGEQREQ=?
+CGEQREQ: "IP",(0-4),(1-63 in 1 kbps steps, 64-568 in 8 kbps steps, 576-8640 in 64
kbps steps),(1-63 in 1 kbps steps, 64-568 in 8 kbps steps, 576-8640 in 64 kbps steps,
8700-16000 in 100 kbps steps),(1-63 in 1 kbps steps, 64-568 in 8 kbps steps, 576-8640
in 64 kbps steps),(1-63 in 1 kbps steps, 64-568 in 8 kbps steps, 576-8640 in 64 kbps
steps, 8700-16000 in 100 kbps
steps),(0,1),(10-1500,1502,1510,1520),("1E6","1E5","1E4","1E3","7E3","1E2","1E1"),("
6E8","1E6","1E5","1E4","5E3","4E3","1E3","5E2","1E2"),(0-2),(10-150 in 10 ms steps,
200-950 in 50 ms steps, 1000-4000 in 50 ms steps),(0-3),(0,1),(0,1)
OK
Reference
3GPP TS 27.007
11.2.13 +CGEQNEG，G Quality of Service Profile (Negotiated)
This command allows the TE to retrieve the negotiated QoS profiles returned in the Activate PDP Context
Accept message.
Command
Description
Set [Function]
Set command allows the TE to retrieve the negotiated QoS profiles returned in the
Activate PDP Context Accept message.
[Syntax]
AT+CGEQNEG =[<cid>[,<cid>[,…]]]
[Response/Action]
+CGEQNEG: <cid>, <Traffic class> ,<Maximum bit rate UL>, <Maximum bit rate
DL> ,<Guaranteed bit rate UL>, <Guaranteed