Fibocom L860-GL - 11.2.25 +CGEQOS, Define EPS Quality Of Service

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 244 of 254
Command Description
0 Indicates usage of radio access of type GERAN, see 3GPP TS 45.001 [146].
1 Indicates usage of radio access of type UTRAN TDD, see 3GPP TS 25.212 [144].
2 Indicates usage of radio access of type UTRAN FDD, see 3GPP TS 25.212 [144].
3 Indicates usage of radio access of type E-UTRAN TDD, see 3GPP TS 36.300 [145].
4 Indicates usage of radio access of type E-UTRAN FDD, see 3GPP TS 36.300 [145].
Example AT+CSCON=?
+CSCON: (0-3)
OK
AT+CSCON?
+CSCON: 0,0,0
OK
AT+CSCON=1
OK
AT+CSCON?
+CSCON: 1,0,0
OK
Reference 3GPP TS 27.007
11.2.25 +CGEQOS, Define EPS Quality Of Service
Command Description
Set [Function]
The set command allows the TE to specify the EPS Quality of Service parameters
<cid>, <QCI>, [<DL_GBR> and <UL_GBR>] and [<DL_MBR> and <UL_MBR>] for a
PDP context or Traffic Flows.
When in UMTS/GPRS the MT applies a mapping function to UTMS/GPRS Quality of
Service. A special form of the set command, +CGEQOS= <cid> causes the values for
context number <cid> to become undefined.
[Syntax]
AT+CGEQOS=[<cid> [,<QCI> [,<DL_GBR>,<UL_GBR> [,<DL_MBR>,<UL_MBR]]]]
[Response/Action]
OK