Fibocom L860-GL - 13 Multi-Config Commands; 14 GNSS Commands

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 247 of 254
Command Description
[Response/Action]
+GTMCFWVER: <version>
OK
Test [Function]
N/A
[Syntax]
N/A
[Response/Action]
N/A
Parameters <version>
Return FW version.
Example AT+ GTMCFWVER?
+GTMCFWVER: "18500.5001.00.01.00.01"
OK
13 Multi-Config Commands
These commands allow the user to query the information of the firmware, the operator supported by the
firmware. Please refer to the manual as below. (Only for internal use)
No.
Name
Version
1 FIBOCOM AT Commands User Manual_Multi-Carrier_V1.0.5.docx
(Only Chapter Five)
V1.0.5
14 GNSS Commands
These commands are used to configuration location service. Please refer to the manual as below. (Only
for internal use)
No.
Name
Version
1
FIBOCOM AT Commands User Manual_GNSS_V1.0.1.docx
V1.0.1