Fibocom L860-GL - XDNS, Dynamic DNS Request

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 181 of 254
Command Description
Reference
9.1.21 +XDNS, Dynamic DNS Request
This command enables / disables a dynamic DNS (Domain Name Service) request before
context activation. After context activation the DNS addresses of all activated contexts
can be read out.
Command Description
Set
[Function]
Set command enables/ disables a dynamic DNS (Domain Name Service) request
before context activation
[Syntax]
AT+XDNS=<cid>,<mode>
[Response/Action]
OK
or
CME ERROR: <error>
Read [Function]
Read command is used to read DNS addresses of all activated contexts after context
activation.
[Syntax]
AT+XDNS?
[Response/Action]
+XDNS: <cid>, <primary DNS>, <secondary DNS>
[+XDNS: <cid>, <primary DNS>, <secondary DNS>
[...]]
OK