Fibocom L860-GL - CSDH, Show Text Mode Parameters

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 80 of 254
Command Description
OK
AT+CSMP= 1,256,0,0
+CMS ERROR: operation not supported
AT+CSMP=?
OK
AT+CSDH=1
OK
AT+CMGF=1
OK
AT+CMGW="15820447141"
> ABC(^Z)
+CMGW: 6
OK
AT+CMGR=6
+CMGR: "STO UNSENT","15820447141","",129,17,0,0,167,"+8613800755500",145,3
ABC
OK
Reference 3GPP TS 27.005
The following table shows the VP format.
<Parameter> Description
0 to 143 (TP-VP + 1) x 5 minutes (i.e. 5 minutes intervals up to 12 hours)
144 to 167 12 hours + ((TP-VP - 143) x 30 minutes)
168 to 196 (TP-VP - 166) x 1 day
197 to 255
(TP-VP - 192) x 1 week
6.1.6 +CSDH, Show Text Mode Parameters
This command controls whether detailed header information is shown in text mode result codes.
Command Description
Set [Function]
The set command controls whether detailed header information is shown in text mode