Fibocom L860-GL - 6.1.2 +CPMS, Preferred Message Storage

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 71 of 254
Command Description
Parameters <service> Integer that defines the type of service
0:SMS AT command grammar is compatible with GSM Phase 2
1:SMS AT command grammar is compatible with GSM Phase 2+
<mt> Mobile terminated messages
0 Not supported by the Modem
1 Supported by the Modem
<mo> Mobile originated messages
0 Not supported by the Modem
1 Supported by the Modem
<bm> Broadcast type messages
0 Not supported by the Modem
1 Supported by the Modem
Example AT+CSMS?
+CSMS: 1,1,1,1
OK
Reference 3GPP TS 27.005
6.1.2 +CPMS, Preferred Message Storage
This command handles the selection of the preferred message storage area. The message storage area
is divided into three parts, mem1, mem2 and mem3.
Command Description
Set [Function]
The Set command sets the memory storage.
[Syntax]
AT+CPMS=<mem1>[,<mem2>[,<mem3>]]
[Response/Action]
+CPMS: <used1>,<total1>,<used2>,<total2>,<used3>,<total3>
OK
or: