Fibocom L860-GL - Q, Result Code Suppression

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 33 of 254
Command
Description
Parameters <value>
0 Transmits limited headers and trailers, and numeric text.
1 Transmits full headers and trailers, and verbose response text.
The default value is 1.
Example ATV1
OK
ATV00
4.1.2 Q, Result Code Suppression
This command determines whether to output the result codes. Information text transmitted in response to
commands is not affected by the setting of this parameter.
Command Description
Execution [Function]
The Execution commands sets whether or not to output result codes.
[Syntax]
ATQ<value>
[Response/Action]
OK
or:
+CME ERROR: <err>
Read N/A
Test N/A
Parameters <value>
0 Transmit result codes.
1 Suppress result codes.
The default value is 0..
Example ATQ0
OK
ATQ1