Fibocom L860-GL - CSMP, Set Text Mode Parameters

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 78 of 254
<SCA> Character in SMS (Text mode) Mapped character for SMS PDU mode
‘+’ 0x91
‘*’ ‘A’
‘#’ ‘B’
‘A’ ‘C’
‘B’ ‘D’
‘C’ ‘E’
6.1.5 +CSMP, Set Text Mode Parameters
This command is a basic command and is used to select values for additional parameters needed when
SMS is sent to the network or placed in storage when TEXT mode is selected.
Command Description
Set [Function]
The set command selects values for additional parameters needed when SMS is sent to
the network or placed in storage when text format message mode is selected.
[Syntax]
AT+CSMP=[<fo>[,<vp>[,<pid>[,<dcs>]]]]
[Response/Action]
OK
or:
+CME ERROR: <err>
Read [Function]
The read command returns the current parameters value.
[Syntax]
AT+CSMP?
[Response/Action]
+CSMP: <fo>,<vp>,<pid>,<dcs>
OK
Test [Function]
The test command just returns OK.