Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 44 of 254
Command Description
OK
or:
Test [Function]
[Syntax]
AT+CCID=?
[Response/Action]
OK
Parameters N/A
Example AT+CCID
+CCID: 89860018190839008096
OK
4.1.10 +CSIM, Generic SIM Access
This command allows a direct control of the SIM by a distant application on the TE.
Command Description
Set [Function]
Set command transmits to the MT the <command> it then shall send as it is to the SIM
The <response> is returned in the same manner to the TE.
[Syntax]
AT+CSIM=<length>,<command>
[Response/Action]
+CSIM: <length>,<response>
OK
Or
CME ERROR: <error>
Read N/A
Test [Function]
The test command only returns OK.
To Next Page
Loading...
