Fibocom L860-GL - CPINR, Remaining PIN Retries

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 136 of 254
8.1.6 +CPINR, Remaining PIN Retries
Set command cause the MT to return the number of remaining PIN retries for the MT
passwords with intermediate result code +CPINR: <cod>,<retries>[,<default_retries>]
for standard PINs. One line with one intermediate result code is returned for every
<cod> selected by <sel_code>. When execution command is issued without the
optional parameter <sel_code>, intermediate result codes are returned for all <cod>
s. In the intermediate result codes, the parameter <default_retries> is an optional
(manufacturer specific) parameter, per <cod>.
Command Description
Set [Function]
The Set command cause the MT to return the number of remaining PIN retries for the
MT passwords.
[Syntax]
AT+CPINR[=<sel_code>]
[Response/Action]
OK
Or
+CME ERROR: <err>
Read N/A
Test [Function]
The Test command only returns OK.
[Syntax]
AT+CPINR=?
[Response/Action]
OK
Parameters <retries>:
integer type. Number of remaining retries per PIN.
<default_retries>:
integer type. Number of default/initial retries per PIN.
<sel_code>:
String type. Same values as for the <cod> parameters. These values are strings and