Fibocom L860-GL - Page 98

Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 98 of 254
Command Description
If text mode (+CMGF=1) command execution is successful and SMS-SUBMIT:
+CMGR:
<stat>,<da>[,<alpha>][,<toda>,<fo>,<pid>,<dcs>[,<vp>],<sca>,<tosca>,<length>]<CR>
<LF><data>
If text mode (+CMGF=1) command execution is successful and SMS-COMMAND:
+CMGR:
<stat>,<fo>,<ct>[,<pid>[,<mn>][,<da>][,<toda>],<length><CR><LF><cdata>]
If text mode (+CMGF=1) command execution is successful and CBM storage:
+CMGR:
<stat>,<sn>,<mid>,<dcs>,<page>,<pages><CR><LF><data>
If text mode (+CMGF=1) command execution is successful and
SMS-STATUS-REPORT:
+CMGR:
<stat>,<fo>,<mr>[,<ra>][,<tora>],<scts>,<dt>,<st>
If PDU mode (+CMGF=0) and command execution is successful:
+CMGR:
<stat>[,<alpha>],<length><CR><LF><pdu>
otherwise:
+CMS ERROR: <err>
Read N/A
Test [Function]
This command only returns OK.
[Syntax]
AT+CMGR=?
[Response/Action]
OK
Parameters <index> Index in storage of the message to be retrieved.
<stat> Status of message in memory:
PDU mode
Text mode
Description
0
“REC UNREAD”
Received unread messages
1
“REC READ”
Received read messages
2
“STO UNSENT”
Stored unsent messages