Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 90 of 254
acknowledgement) from the TE within a predefined timeout of 15 seconds. Within the timeout the Modem
will not send another +CMT unsolicited response to the TE before the previous one is acknowledged. If
the +CMT is acknowledged within the timeout, the new SMS is not saved in the message storage. If the
Modem does not receive acknowledgment after receiver a SMS within the required time, CNMI
parameters will NOT be reset automatically and the +CMT unsolicited response will send to the TE again.
Read N/A
Test N/A
Parameters <oa> Message origination address.
<scts> Service center time stamp.
<tooa> Type of origination address
<fo> First octet of the SMS
<pid> Protocol Identifier
<dcs> Data Coding Scheme
<sca> Service Center Address
<tosca> Type of Service Center Address
<data> Message contents.
<alpha> Alpha ID of message.
<length> In PDU mode: Size of message, in octets, excluding SMSC data.
In TEXT mode: number of characters included in the <data>
<pdu> Message header and contents in PDU mode format. See description in
“+CMGR, Read Message”.
Example AT+CMGF=0
OK
AT+CNMI=1,2
OK
AT+CSDH=1
OK
AT+CMSS=142,"054565034" // send to myself
+CMSS: 74
OK
+CMT: "+972544565034",,"04/11/04,09: 48: 36+08",145,4,0,0,"+97254120032",145,3
To Next Page
Loading...
