Reproduction forbidden without Fibocom Wireless Inc. written authorization – All Rights Reserved.
FIBOCOM L860 AT Commands User Manual Page 68 of 254
Command Description
OK
Test [Function]
Test command returns list of the supported (on/off)s. If the reporting is enabled, the
MT returns the URC whenever the time zone is changed.
[Syntax]
AT+ CTZR=?
[Response/Action]
+CTZR: (list of supported < reporting >s)
Parameters < reporting >
integer type value indicating:
0 disable time zone change event reporting
1 Enable time zone change event reporting by unsolicited result code +CTZV: <tz>.
2 Enable extended time zone and local time reporting by unsolicited result code
+CTZE: <tz>,<dst>,[<time>].
3 Enable extended time zone and universal time reporting by unsolicited result code
+CTZEU: <tz>,<dst>,[<utime>].
Note: <reporting>=3 is supported only when CAT_R13_SUPPORT is enabled in the
build config.
<tz>
integer value indicating the time zone.
<time>
string type value; format is "Yy/MM/dd,hh:mms" ,wherein characters indicates year,
month, day, hour, minutes, seconds.
<dst>
daylight savings time value:
0 No adjustment for Daylight Saving Time
1 +1 hour adjustment for Daylight Saving Time
2 +2 hours adjustment for Daylight Saving Time
<timezone>
string type value representing the sum of the local time zone (difference between the
To Next Page
Loading...
