Fidelity Electronics A10 - Page 81

81
1/10 second)
Set Repetitive Tare Function
*
ST
F013
;d1#
0 = Off, 1 = On
Set Buzzer
*
ST
F014
;d1;d2;d3#
 d1 = Keyboard Buzzer (0 = Off, 1 = On)
 d2 = System Buzzer (0 = Off, 1 = On)
 d3 = Non-Resettable Memory Buzzer (0 = Off, 1 =
On)
Set Result Buzzer & Action on Negative
Value
*
ST
F015
;d1;d2#
 d1 = Check Buzzer (0 = Off, 1 = IN, 2 = Out, 3 = Hi,
4 = Lo)
 d2 = Action on Negative Value (0 = Off, 1 = On)
Set Keyboard Lock
*
ST
F020
;d1#
0 = Off, 1 = On
Set Near Zero Value
*
ST
F026
;d1#
Maximum 8 digits including decimal (if any)
Set Ask for Operator Number when Power
On
*
ST
F028
;d1#
0 = No, 1 = Yes
Set Allow Letters and Symbols for
Customer & Product Code Manual Entry
*
ST
F030
;d1#
0 = No, 1 = Yes
Set External Input Assignment
*
ST
F032
;d1;d2;d3#
 d1= Int 1 (0~5)
 d2 = Int 2 (0~5)
 d3 = Int 3 (0~5)
0 = Zero, 1 = Tare, 2 = Print/M+, 3 = MR, 4 = Clear,
5 = Unit, 6 = Set, 7 = Check, 8 = Func
Set Report Output Comport
*
ST
F033
;d1#
0 = UART 0; 1 = UART 1; 2 = UART 2; 3 = UART 3; 4 =
UART 4; 5 = LAN; 6 = Disk
Set Customer Code and Description
*
ST
CCDE
;d1;d2#
d1 =1~18-digit Customer Code. Blank = nothing
d2 = 1~30 Customer Code Description. Blank = nothing
Set Product Code and Description
*
ST
PCDE
;d1;d2#
 d1 =1~18-digit Product Code. Blank = nothing
 d2 = 1~30 Product Code Description. Blank =
nothing
Set Weight Check Limits
*
ST
CHKW
;d1;d2#
 d1= Lo limit (Maximum 8 digit including decimal, if
any). Blank = nothing