Fidelity Electronics A10 - Page 82

82
 d2 = Hi limit (Maximum 8 digit including decimal, if
any). Bank = nothing
Set Quantity Check Limits
*
ST
CHKQ
;d1;d2#
 d1= Lo limit. No decimal will be accepted. Blank =
nothing
 d2 = Hi limit. No decimal will be accepted. Blank =
nothing
Set Pre-set Tare Value (Note O1)
*
ST
PSTA
;d1#
Maximum 8 digit including decimal
Set @WT
*
ST
AVGW
;d1#
Maximum 8 digit including decimal
Set Expiry Duration
*
ST
EXPY
;d1#
4 digits. 0000 = today, 9999 = 9999 days plus today
Note O1: - If old preset tare value already exists in memory, 2 command
strings are necessary: -
a. 1
st
command string to clear this old preset tare value first.
b. 2
nd
command string to set new preset tare value.